- Store
- >
- iPhone Replacement Screen
- >
- iPhone 6 Replacement Screen - 4.7" LCD Screen Repair Parts
iPhone 6 Replacement Screen - 4.7" LCD Screen Repair Parts
SKU:
$29.99
$29.99
Unavailable
per item
Application: iPhone 6 Screen Replacement-Repair/Replacing old 6 LCD Display Screen, broken, cracked, damaged iPhone 6 Screen, faulty Display issue or dead pixels of phone.
Specification:
1. Screen attributes: 4.7 inches, 1334 x 750 pixels
2. Color: White
3. Free Screwdriver and tools are available
4. Compatibility: only for iPhone 6. (Doesn’t compare with iPhone 6S)
Installation tips:
1. Please watch the YouTube video guide before installation, or find the professional.
2. Please mark every screws which all have different sizes and length when replace the assembly or the screen may be broken because of putting the screw in wrong place.
3.Please make sure your iPhone is powered off before installation.
4. Be aware of the sensitive and frangible flex cables! DO NOT over- bend or use excessive force to tear it. Please be patient and handle carefully!
Installation Steps①:
Step 1: Power off your iPhone before beginning disassembly.Remove the two pentalobe screws next to the Lightning connector.
Step 2: While holding the iPhone down with one hand, pull up on the suction cup to slightly separate the front panel assembly from the rear case.Using a plastic opening tool,begin to gently pry the rear case down,away from the display assembly,while continuing to pull up with the suction cup.
Step 3: Open the iPhone by swinging the home button end of the front panel assembly away from the rear case,using the top of the phone as a hinge.
Step 4: Remove the following five screws securing the front panel assembly cable bracket
Step 5: Remove the two screws securing the home button bracket.
Step 6: Remove the screws from the earpiece speaker/front-facing camera bracket.
Installation Steps②:
Step 1: Remove screws from the earpiece speaker/front-facing camera bracket. Remove the earpiece speaker/front-facing camera bracket from the front panel. Lift the front-facing camera out of its recess in the front panel. Holding the front-facing camera out of the way,remove the earpiece speaker from the front panel.
Step 2: Keeping the front-facing camera out of the way, use the point of a spudger to push the ambient-light sensor up out of its recess in the front panel. Fold the front-facing camera and sensor cable up to allow access to the microphone. Carefully pry the microphone end of the sensor cable off of the adhesive holding it to the front panel. Remove the front-facing camera and sensor cable from the front panel.
Step 3: Remove the screws in the picture securing the LCD shield plate to the front panel.
Step 4: Remove the screws in the picture securing the LCD shield plate to the front panel.
Step 5: Lift the front-facing camera end of the LCD shield plate up slightly.
Step 6: Slide the point of a spurge behind the shield plate to gently peel the home button cable up off of the front panel.
Specification:
1. Screen attributes: 4.7 inches, 1334 x 750 pixels
2. Color: White
3. Free Screwdriver and tools are available
4. Compatibility: only for iPhone 6. (Doesn’t compare with iPhone 6S)
Installation tips:
1. Please watch the YouTube video guide before installation, or find the professional.
2. Please mark every screws which all have different sizes and length when replace the assembly or the screen may be broken because of putting the screw in wrong place.
3.Please make sure your iPhone is powered off before installation.
4. Be aware of the sensitive and frangible flex cables! DO NOT over- bend or use excessive force to tear it. Please be patient and handle carefully!
Installation Steps①:
Step 1: Power off your iPhone before beginning disassembly.Remove the two pentalobe screws next to the Lightning connector.
Step 2: While holding the iPhone down with one hand, pull up on the suction cup to slightly separate the front panel assembly from the rear case.Using a plastic opening tool,begin to gently pry the rear case down,away from the display assembly,while continuing to pull up with the suction cup.
Step 3: Open the iPhone by swinging the home button end of the front panel assembly away from the rear case,using the top of the phone as a hinge.
Step 4: Remove the following five screws securing the front panel assembly cable bracket
Step 5: Remove the two screws securing the home button bracket.
Step 6: Remove the screws from the earpiece speaker/front-facing camera bracket.
Installation Steps②:
Step 1: Remove screws from the earpiece speaker/front-facing camera bracket. Remove the earpiece speaker/front-facing camera bracket from the front panel. Lift the front-facing camera out of its recess in the front panel. Holding the front-facing camera out of the way,remove the earpiece speaker from the front panel.
Step 2: Keeping the front-facing camera out of the way, use the point of a spudger to push the ambient-light sensor up out of its recess in the front panel. Fold the front-facing camera and sensor cable up to allow access to the microphone. Carefully pry the microphone end of the sensor cable off of the adhesive holding it to the front panel. Remove the front-facing camera and sensor cable from the front panel.
Step 3: Remove the screws in the picture securing the LCD shield plate to the front panel.
Step 4: Remove the screws in the picture securing the LCD shield plate to the front panel.
Step 5: Lift the front-facing camera end of the LCD shield plate up slightly.
Step 6: Slide the point of a spurge behind the shield plate to gently peel the home button cable up off of the front panel.