SAVE ON BUY STORE
  • Home
  • Store
  • Products
    • CUJO
    • Products
    • Part Center
    • Free Protections
    • Downloads and Drivers
  • How To?
  • Contact Us
    • Contact Us
    • Feedback Center
    • Partners
    • Other Stores >
      • Amazon Store
      • eBay Store
      • Bonanza Booth
  • Store
  • >
  • iPhone Replacement Screen
  • >
  • iPhone 5 Replacement Screen - 4" LCD - Screen Repair Parts

iPhone 5 Replacement Screen - 4" LCD - Screen Repair Parts

SKU:
$22.99
$22.99
Unavailable
per item
iPhone 5 Screen Replacement-Use: Repair/Replacing old 5 LCD Display Screen, broken Screen, cracked iPhone 5 Screen, damaged faulty LCD touch Screen or dead pixels of phone.


✔Compatibility: The iPhone 5 screen is only for iPhone 5 (4 inch).Not for iPhone 5S or 5C.
✔Use to replace defective iPhone 5 LCD digitizer screens like display problems, dead pixels, cracked screens wrong color issues and dead LCD.
✔Installation: Powered off the phone and disconnect the battery cable before installation. Please watch the YouTube video guide before installation, or find the professional.
✔Mind this iPhone 5 replacement screen does NOT come with home button, ear piece,front camera and metal plate,just same as the picture.
✔Free Screwdriver and tools are available

Specification:
Screen Size: 4 inches, 1136 x 640 pixels

Installation tips:
1. Disconnect the battery cable before installation or make sure your phone is powered off. This will protect your phone from incorrect installation damage.
2. Please watch a video tutorial before installation. Be careful and patient can avoid some unnecessary issue.
3. There are many screws when you replacing the assembly which are different in size and length. You'd better to mark them otherwise it may broke the screen if you put the screw in wrong place.
4. The flex cables are very sensitive and frangible. DO NOT over-bend or use excessive force to tear it. Handle Carefully.


Installation steps 1-5:
Step 1: Power off your iPhone and remove the two screws.
Step 2: Apply a suction cup to the lower left corner.
Step 3: Pull up the suction cup and use the pry tool to open it. (Open the Phone just enough to reveal the metal bracket )
Step 4: remove the 4 screws and reconnect the 3 cables.
Step 5: Remove the two screws and earpiece speaker.


Installation steps 6-11:
Step 6: Disconnect the components’ keep them on the plate.
Step 7: Remove the home button.
Step 8: Remove this crew from the back of the display assembly.
Step 9: remove two crews from each side of the LCD frame (four total)
Step 10: Disconnect the buckle.
Step 11: Remove the LCD shield plate from the display assembly.
  • Facebook
Add to Cart
© COPYRIGHT 2015. ALL RIGHTS RESERVED
Designed and Implemented by Smart Design Vancouver
  • Home
  • Store
  • Products
    • CUJO
    • Products
    • Part Center
    • Free Protections
    • Downloads and Drivers
  • How To?
  • Contact Us
    • Contact Us
    • Feedback Center
    • Partners
    • Other Stores >
      • Amazon Store
      • eBay Store
      • Bonanza Booth